Welcome to TPH
Experience The Future Of Industrial Re-Commerce
Verify Security Code
Need Finance
Seeking Loan or Finance for Buying Pre-owned Machines?
Let us help you, kindly fill in the details and our team will get back to you.
Finance Partners
Job Application
Seeking a Job? Fill in the details and upload your CV.
Let us help you, kindly fill in the details and our team will get back to you.
Make an Offer
Submitting an offer moves you closer to securing this deal!
Confirm Your Booking
1.1 The buyer can book a machine/product for a period of 7 days by paying an advance of 5% of the asset value.
1.2 The booking amount must be paid through the designated payment methods available on the TPH platform.
1.3 Booking a machine/product does not guarantee purchase; it only ensures priority access and the opportunity to complete due diligence as the machine will be blocked for other TPH users.
2. Buyer Responsibilities Post-Booking Upon successful payment, the buyer must complete the following within the 7-day booking period:
2.1 Schedule an Inspection: Contact the TPH team to arrange an appointment for a physical inspection of the machine/product.
2.2 Negotiate & Finalize Terms: Work with TPH and the seller to finalize the asset’s value and establish terms for removal/lifting from the seller’s premises.
2.3 Arrange Payment: If the machine/product is deemed satisfactory, the buyer must arrange for the remaining payment (final agreed deal value minus the advance paid).
3. Refund Policy
The booking amount (less applicable deductions) will be refunded in the following cases:
3.1 Seller Rejects the Offer: If the seller does not agree to proceed with the sale.
3.2 Machine/Product Not Suitable: If the machine/product is found unsuitable upon inspection.
3.3 Failure to Complete Inspection/Negotiation: If the buyer is unable to schedule an inspection, negotiate, or coordinate within the 7-day booking period.
3.4 Buyer Opts Out: If the buyer decides not to pursue the purchase for any reason.
4. Deductions & Fees
4.1 In case of a refund, a platform fee of 2% of the booking amount + GST will be deducted as a service charge.
4.2 The remaining amount will be refunded through the original payment method within 7-10 business days.
5. Additional Terms
5.1 If the buyer fails to take any action within the 7-day booking period, the booking will expire, and the amount paid will be non-refundable.
5.2 The buyer acknowledges that TPH serves as an intermediary platform and is not liable for the machine’s condition, seller’s decisions, or the outcome of negotiations.
5.3 Any disputes arising from this agreement shall be resolved as per the dispute resolution mechanism outlined in TPH's general Terms of Service.
Advertise On TPH
We help you reach out to the larger industrial audience.
Get seen by industry decision-makers!
Advertise on The Purchase House and grow your reach.
Choose Language
Brand : SEW | Product Code : TPHUM2371
Hydraulic Cylinder Bore :- 100mm,
Hydraulic Cylinder Stroke :- 200mm,
Machine Height :- 1300mm,
Machine Width :- 500mm
You might also like
NC PRESS BRAKE MACHINE
Capacity :- 63 Ton, MS :- 4mm SS :- 2mm | Type: Sheet; Controller...
Capacity :- 63 Ton, MS :- 4mm SS :- 2mm
Specifications: Type: Sheet; Controller: NC; Sheet Length In mm: 2500; Sheet Thickness In mm: 4;
Brand : Supreme
Product Code : TPHUM4960
Category: Metal Forming & Fabricati... Metal Forming & Fabrication
CNC TURNMILL CENTER
Model No :- SG 42 Controller :- GE Fanuc 18 T Spindle Speed :- 50...
Model No :- SG 42 Controller :- GE Fanuc 18 T Spindle Speed :- 5000 RPM Spindle Power :- 7.5 kVA Accessories :- 3 Live Tools
Specifications: CNC System: Fanuc; Chuck Size In mm: 200; Maximum Turning Diameter: 250; Maximum Turning Length In mm: 300;
Brand : Hardinge
Product Code : TPHIM2572
Category: Engineering & Machine Too... Engineering & Machine Tools
CNC TURNING MACHINE
Model No :- Yang ML 25 A, Controller :- Fanuc OT, X-500mm, Z-510m...
Model No :- Yang ML 25 A, Controller :- Fanuc OT, X-500mm, Z-510mm Connected Load :- 16.5 KVA, LM Guide Ways, Accessories :- Chip Tray
Specifications: CNC System: Fanuc; Chuck Size In mm: 250;
Brand : Yang
Product Code : TPHIM2558
Category: Engineering & Machine Too... Engineering & Machine Tools
CNC TURNING MACHINE
Spindle Nose Taper :- 52mm, Controller :- Fanuc OT , Box guideway...
Spindle Nose Taper :- 52mm, Controller :- Fanuc OT , Box guideways Includes :- Stabilizer
Specifications: Guideway: Box; Tailstock: Yes; CNC System: Fanuc; Chuck Size In mm: 200; Number Of Tool Holders: 8; Maximum Turning Diameter: 230; Maximum Turning Length In mm: 280;
Brand : Colchester
Product Code : TPHIM2542
Category: Engineering & Machine Too... Engineering & Machine Tools
HYDRAULIC SHEARING MACHINE
With Multi Step DRO With Ball Screw in Back Gauge | Mechanism Typ...
With Multi Step DRO With Ball Screw in Back Gauge
Specifications: Mechanism Type: Hydraulic; Max Sheet Length In mm: 2500; Max Sheet Thickness In mm: 4;
Brand : Energy Mission
Product Code : TPHUM4867
Category: Metal Forming & Fabricati... Metal Forming & Fabrication
CNC TURNING MACHINE
Spindle Speed :- 3000 RPM Spindle Power :- 7.5 KW Controller :- S...
Spindle Speed :- 3000 RPM Spindle Power :- 7.5 KW Controller :- Siemens 802D Accuracy :- 10-20 Microns
Specifications: Guideway: Box; Tailstock: Yes; CNC System: Siemens; Spindle Bore: 50; Chuck Size In mm: 200; Number Of Tool Holders: 8; Maximum Turning Diameter: 280; Maximum Turning Length In mm: 500;
Brand : LEADWELL
Product Code : TPHIM2518
Category: Engineering & Machine Too... Engineering & Machine Tools
NC SHEARING MACHINE
NC Hydraulic Shearing Machine Model GS-3108, DAC 310 Controller -...
NC Hydraulic Shearing Machine Model GS-3108, DAC 310 Controller - Delem, Squaring arm - 1 mtr, Stroke length control, Swing away backgauge fature, Shadow line indicatior, Foot Pedal control unit, Backgauge range ( 10-1000mm), First fill of Hydraulic Oil
Specifications: Mechanism Type: Hydraulic; Controller Type: NC; Max Sheet Length In mm: 3000; Max Sheet Thickness In mm: 8;
Brand : Hindustan Hydraulics
Product Code : TPHUM4807
Category: Metal Forming & Fabricati... Metal Forming & Fabrication
NC PRESS BRAKE MACHINE
NC Hydraulic Press Brake Machine, Model No :- CHP-120, Capacity :...
NC Hydraulic Press Brake Machine, Model No :- CHP-120, Capacity :- 120 Ton, HC Controller DA 41 Delem make, Backagauge fingers - 4 nos., Foot switch, Ball screw backgauge (range D-550mm), emergency push button, clamps to secure die, Gear box drive to position the depth stops, Punch holder Amada type on beam, Forst fill of hydraluck Oil , Tooling
Specifications: Type: Sheet; Controller: NC; Sheet Length In mm: 3100; Sheet Thickness In mm: 6;
Brand : Hindustan Hydraulics
Product Code : TPHUM4806
Category: Metal Forming & Fabricati... Metal Forming & Fabrication
CNC TURRET PUNCH MACHINE
CNC Turret Punch Machine Motor :- 15 H.P., With 20 Tools, MS Cutt...
CNC Turret Punch Machine Motor :- 15 H.P., With 20 Tools, MS Cutting :- 3.5mm, SS Cutting :- 1.5 mm,
Specifications: CNC System: Siemens; Number Of Sations: 20; X-Axis Movement In mm: 1260; Y-Axis Movement In mm: 2550;
Brand : AMC
Product Code : TPHUM4788
Category: Metal Forming & Fabricati... Metal Forming & Fabrication
CNC TURNING MACHINE
Model No :- C 250, Controller :- Fanuc 21i - T Spindle Speed :- 6...
Model No :- C 250, Controller :- Fanuc 21i - T Spindle Speed :- 6000 RPM Servo Turret, Chip Conveyer, Transformer, Stabilizer All Included
Specifications: Guideway: Box; Tailstock: Yes; CNC System: Fanuc; Spindle Bore: 50; Chuck Size In mm: 200; Number Of Tool Holders: 12; Maximum Turning Diameter: 300; Maximum Turning Length In mm: 250;
Brand : Nakamura
Product Code : TPHIM2492
Category: Engineering & Machine Too... Engineering & Machine Tools
CNC TURNING MACHINE
Model No :- PUMA 240L Swing Bed Dia:- 600 Spindle Nose :- A2 -8 C...
Model No :- PUMA 240L Swing Bed Dia:- 600 Spindle Nose :- A2 -8 Controller :- Fanuc 21 I TB ( Alpha Drives ) Spindle Motor :- 25 HP Without Tailstock
Specifications: Tailstock: No; CNC System: Fanuc; Spindle Bore: 76; Chuck Size In mm: 250; Number Of Tool Holders: 10; Maximum Turning Diameter: 460; Maximum Turning Length In mm: 650;
Brand : Daewoo Puma
Product Code : TPHIM2490
Category: Engineering & Machine Too... Engineering & Machine Tools
CNC TURNING MACHINE
Model No :- ST 20 Bar Capacity :- 30mm Spindle :- A2-4 Spindle Po...
Model No :- ST 20 Bar Capacity :- 30mm Spindle :- A2-4 Spindle Power :- 57.5kw Spindle Speed :- 3000 RPM X Axis :- 300mm Z Axis :- 500mm Live Tools :- 4, boring bar and turning tool. Slant Bed Type Accuracy :- under 20 microns MS and SS Used
Specifications: Guideway: LM; Tailstock: Yes; CNC System: Haas; Spindle Bore: 40; Chuck Size In mm: 200; Number Of Tool Holders: 12; Maximum Turning Diameter: 300; Maximum Turning Length In mm: 300;
Brand : HAAS
Product Code : TPHIM2470
Category: Engineering & Machine Too... Engineering & Machine Tools
CNC TURNING MACHINE
Chuck Size :- 165mm, Max Turning Length :- 500mm, Max Turning Dia...
Chuck Size :- 165mm, Max Turning Length :- 500mm, Max Turning Dia :- 250mm, X Travel :- 300mm, Z Travel :- 500mm, No. of Tool :- 12, Controller :- Fanuc Oi TF
Specifications: Guideway: LM; Tailstock: No; CNC System: Fanuc; Chuck Size In mm: 165; Number Of Tool Holders: 12; Maximum Turning Diameter: 250; Maximum Turning Length In mm: 500;
Brand : Nakamura
Product Code : TPHIM2443
Category: Engineering & Machine Too... Engineering & Machine Tools
CNC TURNING MACHINE
Spindle Speed :- 5000 RPM Spindle Power :- 5.57.5kw Controller:- ...
Spindle Speed :- 5000 RPM Spindle Power :- 5.57.5kw Controller:- Siemens 802D
Specifications: Guideway: Box; Tailstock: No; CNC System: Siemens; Spindle Bore: 40; Chuck Size In mm: 135; Number Of Tool Holders: 3; Maximum Turning Diameter: 80; Maximum Turning Length In mm: 200;
Brand : Gedee Weiler
Product Code : TPHIM2440
Category: Engineering & Machine Too... Engineering & Machine Tools
explore below categories
Previous Searches
POWER TRANSFORMER
Rated KVA :- 315 KVA, Voltage :- High value-11000, Low Value :- 4... Rated KVA :- 315 KVA, Voltage :- High value-11000, Low Value :- 433, 3 Phase, 50Hz Frequency, Oil Cooling, Copper Winding
Brand : E T E
Product Code : TPHII3244
Category: Electrical & Electronics
Electrical & Electronics
PET SHEET LINE
Output :- 75kg per Hr, Machine with Prasad Drier, 800 Kg Bin, Rec... Output :- 75kg per Hr, Machine with Prasad Drier, 800 Kg Bin, Recently Serviced Including 7.5 Ton Chiller, 17 Inch Grinder, Hydraulic Pump, MTC for Water Cooling Calendar Roll, Imported T-die from U.K width 700mm, With Winder Trimmer, All in Working Condition, Main Motor :- 30 HP, Screw :- 55mm, Hydraulically Operated Continuous Screen Changer :- Rajhuns, MAAG Melt Pump, Barrel in 5 Heating Zones, 700mm Calendar Rolls, MTC with Inbuilt Heating Facility and Inline Silicone coating, Online drying, Inline edge Trimming and Winding, Complete Line Melt Pump, Motors, Variable AC drives, PID Temperature Controllers, Geffran Pressure Sensors, Working Chilling Line with Cooling Tower, Water Tank, 2 Pumps
Brand : NA
Product Code : TPHUM3972
Category: Others
Others
TIG WELDING MACHINE
Heavy Duty Tig Arc Welding Machine (6 Months Warranty) | Type: T...
Heavy Duty Tig Arc Welding Machine (6 Months Warranty)
Specifications: Type: Tig; Output in Amp / Kva: 200;
Brand : Niko Arc T
Product Code : TPHUM1893
Category: Metal Forming & Fabricati... Metal Forming & Fabrication
WELDING MACHINE
Seam Welding Machine, Pneumatic, used for 16 Automobile Applicati...
Seam Welding Machine, Pneumatic, used for 16 Automobile Application, 14000 Amp, Force :- 600kg, External Cooling 9 LPM, with Autodressor, Seperate Knurling Wheel, Welding Length :- 1200mm, Cycle Time :- 52 Second, 50 Second it Takes to Weld 1 Mtr
Specifications: Type: Other; Output in Amp / Kva: 1400;
Brand : Kirpekar
Product Code : TPHUM1897
Category: Metal Forming & Fabricati... Metal Forming & Fabrication
Terms & Conditions
Please review the deal terms and payment conditions before proceeding.
Deal Terms
TPH Buyers Deal Management Fees
1% + GST of the deal value is charged to the buyer upon deal completion for co-ordinating the deal end-to-end for you.
Inspection
Assets can be inspected by appointment only. Contact Team TPH to schedule your visit.
Booking & Offers
Found the right machine? Secure it for 7 days with a nominal booking fee, giving you time for inspection, price negotiation, and finalizing terms. If multiple offers are received during this period, the seller reserves the right to choose the most suitable one.
Rigging & Logistics
Once the deal is finalized, Team TPH can help you with optional services for packing, decommissioning, loading, lifting, transportation, and in-transit insurance. Enjoy multiple VAS options and with just 1% + GST as an additional TPH Service Fees over and above the VAS charges, making your transactions stress-free.
Payment Terms & Conditions
These Payment Terms & Conditions (“Payment Terms”) govern all payments made by Buyers through The Purchase House website for the purchase of industrial machinery, equipment, spare parts, inventory, and other listed industrial assets. By making any payment through the Platform, the Buyer acknowledges that they have read, understood, and agreed to these Payment Terms.
-
Payment Authorization
By completing the payment, the Buyer authorizes The Purchase House to collect the applicable payment amount for the selected product(s) through the payment methods available on the Platform.
The Buyer confirms that the payment method used belongs to them or that they are legally authorized to use it.
-
Pricing
All prices displayed on the Platform are in Indian Rupees (INR) unless otherwise specified.
Prices displayed on the Platform may be inclusive or exclusive of applicable taxes, as indicated on the respective product page.
Prices are subject to change without prior notice until the payment has been successfully received and the order has been confirmed by The Purchase House.
-
Payment Methods
The Purchase House accepts payments through secure payment channels, including but not limited to:
- Any payment method made available on the Platform
-
Payment Confirmation
A purchase shall be considered confirmed only after:
- Successful receipt of the payment by The Purchase House;
- Verification of the transaction, where required; and
- Confirmation of the order by The Purchase House.
Receipt of payment alone does not automatically guarantee acceptance or confirmation of the order.
-
Order Verification
The Purchase House reserves the right to verify the Buyer’s payment details, billing information, or order details before processing any transaction.
Where necessary, The Purchase House may request additional information or documentation to complete the verification process. The Purchase House also reserves the right to place any transaction on hold or cancel an order if fraudulent, unauthorized, or suspicious activity is suspected.
-
Taxes & Additional Charges
Applicable GST and other statutory taxes shall be charged in accordance with applicable laws.
Where applicable, additional charges such as transportation, loading/unloading, insurance, documentation, bank charges, or payment gateway charges shall be payable by the Buyer and will be communicated during the order process.
-
Payment Failure
If a payment transaction fails due to banking issues, payment gateway errors, insufficient funds, technical issues, network failures, or any other reason, the order shall not be processed until successful payment is received.
The Purchase House shall not be held responsible for delays or failures caused by banks, payment gateways, or other third-party payment service providers.
-
Fraud Prevention
The Purchase House reserves the right to refuse, suspend, investigate, or cancel any transaction suspected to be fraudulent, unauthorized, illegal, or in violation of applicable laws.
Additional verification documents may be requested before approving such transactions.
-
Refunds
Refunds, where approved by The Purchase House, shall be processed in accordance with the applicable Refund & Cancellation Policy.
Approved refunds shall be credited through the original mode of payment after applicable deductions, if any.
Refunds shall not be processed in cash.
The applicable refund processing timeline may vary depending upon the payment service provider or banking institution.
-
Order Cancellation
Cancellation requests shall be subject to The Purchase House applicable Cancellation Policy.
Once an order has been confirmed and processing has commenced, cancellation may not be permitted or may be subject to applicable cancellation charges, unless otherwise approved by THE PURCHASE HOUSE.
-
Ownership of Goods
Ownership of the purchased Asset shall transfer to the Buyer only after:
- Successful receipt of the full payment by The Purchase House;
- Completion of all required documentation, where applicable; and
- Fulfilment of all payment obligations.
-
Payment Security
The Purchase House uses secure payment gateways and commercially reasonable security measures to process online payments.
However, The Purchase House shall not be liable for any interruption, technical error, unauthorized banking transaction, cyber incident, or payment gateway failure beyond its reasonable control.
-
Limitation of Liability
The Purchase House acts as a marketplace facilitating industrial transactions between Buyers and Sellers.
The Purchase House liability relating to payments shall be limited to the amount actually received by The Purchase House for the respective order.
Under no circumstances shall The Purchase House be liable for any indirect, incidental, consequential, or special damages arising from payment delays, banking issues, third-party payment gateway failures, or events beyond its reasonable control.
-
Changes to Payment Terms
The Purchase House reserves the right to amend, modify, or update these Payment Terms & Conditions at any time without prior notice.
Any revised Payment Terms shall become effective immediately upon their publication on the Platform.
-
Governing Law
These Payment Terms & Conditions shall be governed by and construed in accordance with the laws of India.
Any dispute arising out of or relating to these Payment Terms shall be subject to the exclusive jurisdiction of the competent courts at Nashik, Maharashtra.
-
Shipping & Delivery
Shipping, transportation, loading, unloading, lifting, and related logistics shall be the responsibility of the Buyer or Seller, as mutually agreed between them.
Upon request, The Purchase House may assist in arranging transportation through third-party service providers for the convenience of the Buyer or Seller. However, The Purchase House acts only as a facilitator and shall not be responsible or liable for any delay, damage, loss, or other issues arising during shipping, transportation, loading, unloading, lifting, or delivery of the purchased Asset.
Request a Call
Leave your mobile number below and we'll call you shortly about this product.
Stay Updated About pre-owned Machines & Inventories In Stock
A Venture By Trebax Solutions Pvt. Ltd.
- get in touch with us : +91 8956665945
- connect@thepurchasehouse.com
Company
Policy
Quick Links
Help Desk
Interested in this SEW HYDRAULIC PRESS MACHINE?
✕
DeX - Your Own Deal Xpert!
AI-Powered • OnlineHi, I'm DeX - Your Own Deal Xpert!
How can I help you today?
